|Applicable materials||PLA、PVC、PE、ABS、EVA、PP、PC、TPU etc.|
|Filament diameter accuracy||±0.02mm|
|Pressure measurement range||0-50MPa|
|Pressure measurement accuracy||0.5%F.S|
|Heating/cooling method||Electric heating / Fan cooling|
|Operating temperature||Room temperature-350°C|
|Temperature control accuracy||±1℃|
|Main motor power||3kW|
|Working voltage||Three-phase 380VAC±10%,Single-phase 220VAC±10%,50Hz|
|L x W x H||2600mm×915mm×1500mm|
The filtration pressure value tester consists of precision screw extrusion system and special melt pump. The melt pressure sensor is installed in front of the pump and a pressure-screw-speed control loop is formed. Screen changer can be disassembled and assembled easily and quickly for easy replacement of the screen, the perforated plate support multi-layer screen. The test curves and reports of FPV filtration pressure value can be generated by testing and recording the pressure changes during polymer extrusion with melt pressure sensor through dedicated software.
Mixing chamber has volume of 55mL, 200mL, 300mL as options, the Torque Rheometer has drive and control measurement functions and equipped with precision torque sensor, precision planetary reducer and servo motor. It is used to analyze the plasticization and rheological properties of polymer materials, helping users to carry out inspection and processing design of raw material.
The capillary rheometer consists of precision screw extrusion system, capillary die or narrow slit die, and weighing unit. There are optional dies with different caliber and aspect ratio, extrusion by screw allows the polymer to pass through the capillary at a constant flow rate, by testing the pressure drop created between the two specific pressure points, under these conditions, the shear stress and shear rate of the polymer melt with Newtonian rheological properties were calculated through the software.